WARNING ● Always wear the seat belt correctly when the vehicle is in motion. Improperly wearing a seat belt increases the risk of injury or death in the event of a collision. ● Before wearing the seat belt, make sure the seat is adjusted to a proper position. ● Two persons must not share a seat belt at the same time (for example, holding a child), as it will cause secondary injury to the child in the event of an accident. ● Do not tilt the seat backrest too far backward, otherwise it will seriously affect the protection function of the seat belt. ● Do not attach the seat belt to hard, fragile or sharp objects, such as pens, keys, glasses, etc., which may cause personal injury.
● Do not place anything between the body and the seat belt, so as not to affect the protection function of the seat belt. Adjust the seat belt height Safety Without pressing the button, try to move the height adjuster downward to check whether the adjuster is locked in place. WARNING ● Make sure the seat belt is in the correct position and lock the height adjuster in place before driving. If the seat belt in an incorrect position or the shoulder height adjuster is not locked in place, the effect of the seat belt will be degraded in the event of a collision. Unfasten seat belt The vehicle is equipped with a front seat belt height adjuster.
The seat belt height adjuster is divided into 4 gears in total. Drivers and passengers can choose the appropriate gear according to their own needs, but they need to ensure that the seat belt is in a suitable wearing position. Move up: push the height adjuster upward (in the direction indicated by the arrow in the figure below) and adjust the shoulder belt to an appropriate height as required. 1. Hold the seat belt part next to the tongue to prevent the seat belt from being retracted too quickly; 2. Press the red button at the buckle, take out the tongue, and the seat belt will be automatically retracted into the retractor. WARNING Move down:
press the release button of the height adjuster and move it downward (in the direction indicated by the arrow in the figure below), adjust the shoulder belt to an appropriate height as needed, and then release the release button. When you hear a "click" sound, it means the adjuster is locked. ● When the seat belt is not in use, it shall be fully retracted without dangling. ——————————————————————————————————— 25 2 Safety equipment