10. A/C and Safety System 10-379 A/C and safety system Refitting procedure The refitting procedure is performed in reverse order. 10.2.7.2 Removal and refitting of door pressure sensor Removal procedure Note: – The removal and refitting of the left side door pressure sensor is described here, which can be referred to for the operations on the right side. 1. Turn off all electrical appliances and the start switch. 2. Disconnect the battery negative terminal (refer t o 3.1.6.1 Maintenance and inspection of battery ) 3. Remove the left front door panel assembly (refer to 8.4.2.1 Removal and refitting of front door trim panel assembly ) 4. Remove the left side door pressure sensor. a.
Disconnect the left side door pressure sensor connector. VOYAH FREE