→ Fig. 17 to browse the selection menu. Or directly by the buttons or → Fig. 17 to open and browse the selection menu. Infotainment systems combine important vehicle systems into a central operating unit, such as menu settings, radio, and navigation systems. – Press the buttons or to open the menu display item, and press the button → Fig. 17 to open the information display item and wait a few seconds until the system automatically opens the menu or displays the information. General instructions on menus and system settings The following sections introduce how to make adjustments to the vehicle settings through the vehicle settings menu.
See → Booklet Infotainment System for information on how to operate info- tainment systems and their alarm and safety in- structions. 1) Adjust menu settings – Press the arrow buttons or → Fig. 17 in the displayed menu until the display displays the desired menu item. The selected menu item displays a checkmark through a box – Press the button → Fig. 17 to make the re- quired changes. “Check ”mark indicates that the selected system or function is active. System setting Depending on the vehicle and equipment, click or Vehicle Settings on the infotainment System, information can be displayed and set- tings can be adjusted by clicking on the corre- sponding function button.
Return to menu selection Press the button or → Fig. 17 exit the menu. Button in the multifunction steering wheel WARNING Vehicles equipped with analogue instrument cluster: Button → Fig. 17 can be used to switch between the current and previous menus. If the driver is distracted, this can cause acci- dents and serious injuries. Operating the Info- tainment system can distract you from the road. Vehicles equipped with digital instrument cluster: But- ton → Fig. 17 can be used to switch between different information modes. ● Drive with your full attention and with re- sponsibility.
If the display displays fault alarm informa- tion when the ignition switch is on, certain settings or related information cannot be dis- played as described above. In this case, you should go to the qualified workshop as soon as possible to rectify the problem. When you start the engine after the 12-volt vehicle battery has been totally discharged, replaced, or after a jump start, you may find sys- tem settings, e.g. Time, date, and personal con- venience features have been changed or deleted. Check and correct the settings as necessary once the 12-volt vehicle battery has been sufficiently charged.
Settings and display in the infotainment system Vehicle settings menu Please refer to at the start of the chapter on page 25. Introduction This chapter contains information on the follow- ing subjects: You can switch individual functions and systems on and off and adjust the settings in the vehicle settings of the Infotainment system. – Vehicle settings menu 25 182.5C1.TRO.74 1) Depending on vehicle equipment, some vehicles do not provide this manual. Driver information 25