EN Precautions for Maintenance Work 5 Warning: Do not use this machine in environments where flammable gas, explosive gas, or the like might be present. In addition, do not use flammable gas sprays in or near this product. Otherwise, there is a risk of fire. Do not insert or drop metallic or flammable items into any openings on the machine. Otherwise, there is a risk of electric shock or fire. Do not touch any areas inside this product other than those that are indicated in this manual. Otherwise, there is a risk of electric shock or burns.
Do not remove any parts other than those that are indicated in this manual, and do not install, disassemble, or modify any parts other than those specified. Otherwise, you could be injured or an accident could occur due to abnormal heat or electric shock. Caution: Do not stand on or place heavy objects on this product. The product may fall or break, which may injure the user. Caution: During maintenance work, wear all of the protective equipment described in the maintenance procedures in the "User’s Manual" (eye protection, protective gloves, respiratory protection, etc.). • Use protective equipment compliant with the safety regulations.
• Using additional protective equipment compliant with the safety regulations is recommended when nec- essary. When opening the maintenance cover for maintenance work, be sure to press the Pause/Restart button on this machine to pause the operation before starting work. Also, be sure to wear eye protection. Failure to do so could cause cleaning water to splash into your eyes. If the cleaning water comes into contact with your skin, or enters your eyes or mouth, take the below mea- sures. • If it gets on your skin, rinse immediately with soap and water. • If it enters your eyes, rinse immediately with water.
Failure to observe this precaution could result in blood- shot eyes or mild inflammation. If problems persist, consult with a physician. • If it enters your mouth, consult a physician immediately. If the cleaning water spills on the floor, wipe it up using a cloth or similar material. Failure to do so could lead to injury due to slipping. Perform maintenance work within the temperature and humidity ranges specified in "Specifications" of the "User's Manual". Use the products properly according to the information provided in the "Safety Data Sheet" (SDS) for each product. The Safety Data Sheet can be downloaded from the Epson website.