zeekr 007 — Concealing panel

Loading cargo CAUTION ■ Before you fold the seat backs, lower the rear head restraints to the bottom and move the front seats forward to make enough room. Otherwise, you might damage the head restraints. ■ Make sure the seat is empty and the rear center armrest is folded before you fold the seat back. ■ Before you fold the seat back, make sure you remove the seat belt from the guide hole and move it to the door side so it doesn't get in the way of folding. When you unfold the seat back, pull the seat belt out again so it doesn't get stuck. Restore the seat back and reposition the seat belt into the guide hole.

Concealing panel Concealing panel can prevent people outside the car from peeping items in the trunk and protect your privacy. This will also keep the items in the trunk from flying out while you drive, which could be dangerous for you and others. To unfold the concealing panel, you just need to do the reverse of what you did to fold it. CAUTION ■ Do not pull the concealing panel out of the slide directly when stowing it. Stowing the concealing panel You can stow the concealing panel by following these steps: Slide the concealing panel out along its track until it reaches a certain point. Pull the concealing panel upwards.

Taking out the concealing panel Push the concealing panel in until it is near the rear seat back. You can take out the concealing panel by following these steps: Remove the pin from the groove and then take out the concealing panel. Pull the concealing panel upwards. 28