User's Guide Solving Problems ❏ Make sure the paper size and paper type settings of the paper source are correct. Related Information & “Environmental Specifications” on page 129 & “Available Paper and Capacities” on page 25 & “Paper Handling Precautions” on page 24 & “Loading Paper in the Rear Paper Feed” on page 26 & “Cleaning the Paper Path” on page 89 Original Does Not Feed in the ADF ❏ Use originals supported by the ADF. ❏ Load originals in the correct direction, and slide the ADF edge guides against the edges of the originals. ❏ Clean the inside of the ADF. ❏ Do not load above the line just under the d symbol inside the ADF edge guide.
❏ Check that the ADF icon appears on the control panel. If it does not appear, place the originals again. Related Information & “Available Originals for the ADF” on page 30 & “Placing Originals on the ADF” on page 30 & “Cleaning the ADF” on page 89 Power and Control Panel Problems Power Does Not Turn On ❏ Hold down the P button for a little longer. ❏ Make sure the power cord is securely plugged in. Power Does Not Turn Off Hold down the P button for a little longer. If you still cannot turn off the printer, unplug the power cord. To prevent the print head from drying out, turn the printer back on and turn it off by pressing the P button.
Power Turns Off Automatically ❏ Select Power Off Settings in Setup , and then disable the Power Off If Inactive and Power Off If Disconnected settings. ❏ Disable the Power Off Timer setting in Setup . 109