User's Guide Faxing Various Ways of Receiving Faxes Receiving Faxes Manually When you connect a telephone and set the Receive Mode setting of the printer to Manual , follow the steps below to receive faxes. 1. When the telephone rings, pick up the handset. 2. When you hear a fax tone, select Receive on the printer's control panel. Note: When you enable the Remote Receive feature, you can only start receiving the fax by operating the telephone. 3. Press the x button, and then hang up the handset.
Related Information & “Receiving Faxes Using a Connected Telephone (Remote Receive)” on page 72 & “Saving Received Faxes” on page 73 Receiving Faxes Using a Connected Telephone (Remote Receive) To receive a fax manually, you need to operate the printer after you pick up the handset of the telephone. By using the Remote Receive feature, you can start receiving a fax just by operating the phone. The Remote Receive feature is available for telephones that support tone dialing. Related Information & “Receiving Faxes Manually” on page 72 Setting Up Remote Receive 1. Enter Setup from the home screen. 2. Select Fax Settings > Receive Settings > Remote Receive . 3.
After enabling Remote Receive , enter a two digit code (0 to 9, *, and # can be entered). 4. Press the OK button. Using Remote Receive 1. When the telephone rings, pick up the handset. 2. When you hear a fax tone, enter the start code using the telephone. 3. After confirming that the printer has started receiving the fax, hang up the handset. 72