User's Guide Solving Problems Faxes Are Sent at the Wrong Size ❏ When sending a fax using the scanner glass, place the original correctly aligning its corner with the origin mark. ❏ Clean the scanner glass and the document cover. If there is dust or stains on the glass, the scanning area may extend to include the dust or stains, resulting in the wrong scanning position or small images. Related Information & “ Fax Mode” on page 17 & “Placing Originals” on page 31 & “Cleaning the Scanner Glass” on page 92 Received Fax Quality Is Poor ❏ Enable the ECM setting on the control panel. ❏ Contact the sender and ask them to send at a higher quality mode. ❏ Reprint the received fax.
Related Information & “ Fax Settings ” on page 21 & “Reprinting Received Faxes” on page 76 Received Faxes Are Not Printed If an error has occurred on the printer, such as a paper jam, the printer cannot print received faxes. Check the printer. Related Information & “Checking the Printer Status” on page 105 & “Removing Jammed Paper” on page 106 & “Replacing Ink Cartridges” on page 77 Other Faxing Problems Cannot Make Calls on the Connected Telephone Connect the telephone to the EXT. port on the printer, and pick up the receiver. If you cannot hear a dial tone through the receiver, connect the phone cable correctly.
Related Information & “Connecting Your Phone Device to the Printer” on page 65 127