User's Guide Faxing 8. Press the x button. Note: mode top screen, and then press the u button. Until the fax is sent at the specified time, you cannot send other faxes. To cancel the fax, press the y button on the fax Related Information & “Sending Faxes Using the Control Panel” on page 70 & “Placing Originals” on page 31 & “ Fax Mode” on page 17 Sending Many Pages of a Monochrome Document (Direct Send) When sending a fax in monochrome, the scanned document is temporarily stored in the printer's memory. Therefore, sending a lot of pages may cause the printer to run out of memory and stop sending the fax.
You can avoid this by enabling the Direct Send feature, however, it takes longer to send the fax because the printer performs scanning and sending simultaneously. You can use this feature when there is only one recipient. From the home screen, select Fax , and then press the OK button. Set Direct Send to On . Sending a Fax from a Computer You can send faxes from the computer by using the FAX Utility and PC-FAX driver. See the help of FAX Utility and PC-FAX driver for the operating instructions. Related Information & “PC-FAX Driver (Fax Driver)” on page 99 & “FAX Utility” on page 100 Receiving Faxes Setting Receiving Mode You can set Receive Mode using the Fax Setting Wizard .
When you set up the fax feature for the first time, we recommend using the Fax Setting Wizard . If you want to change the Receive Mode settings individually, follow the steps below. 1. Enter Setup from the home screen. 2. Select Fax Settings > Receive Settings > Receive Mode . 72