User's Guide Faxing Sending Faxes Basic Fax Sending Operations Send faxes in color or monochrome (B&W). Note: If the fax number is busy or a problem occurs, the printer automatically redials twice after one minute. Sending Faxes Using the Control Panel 1. Place the originals. Note: You can send up to 100 pages in one transmission; however depending on the remaining amount of memory, you may not be able to send faxes even with less than 100 pages. 2. Enter Fax from the home screen. 3. Specify the recipient. ❏ To enter manually: Enter numbers using the numerical keypad, and then press the OK button. ❏ To select from the contacts list: Press the button, and then select the recipient.
❏ To select the last dialed number: Press the button. Note: ❏ You can send the same monochrome fax to up to 30 recipients. A color fax can only be sent to one recipient at a time. ❏ To add a pause (pause for three seconds) during dialing, enter a hyphen by pressing . ❏ If you set an external access code in Line Type , enter "#" (hash) instead of the actual external access code at the beginning of the fax number. ❏ If you press the button and the last fax was sent to a group dial entry, the entry registered last in the group is displayed. ❏ To delete the recipient you selected, press the r button, and then select Delete Contacts . 4.
Press the OK button, and then make settings such as the resolution and the sending method as necessary. 5. Press the x button. Note: ❏ To cancel sending, press the y button. ❏ It takes longer to send a fax in color because the printer performs scanning and sending simultaneously. When sending a fax in monochrome, it may also take longer depending on the type of the original, such as photo or text, or the resolution setting. Related Information & “Placing Originals” on page 32 & “ Fax Mode” on page 17 & “Registering Contacts for Faxing” on page 71 73