User's Guide Faxing Related Information & “Receiving Faxes Using a Connected Telephone (Remote Receive)” on page 77 & “Saving Received Faxes on a Computer” on page 78 Receiving Faxes Using a Connected Telephone (Remote Receive) To receive a fax manually, you need to operate the printer after you pick up the handset of the telephone. By using the Remote Receive feature, you can start receiving a fax just by operating the phone. The Remote Receive feature is available for telephones that support tone dialing. Related Information & “Receiving Faxes Manually” on page 76 Setting Up Remote Receive 1. Enter Setup from the home screen. 2. Select Fax Settings > Receive Settings > Remote Receive . 3.
After enabling Remote Receive , enter a two digit code (0 to 9, *, and # can be entered). 4. Press the OK button. Using Remote Receive 1. When the telephone rings, pick up the handset. 2. When you hear a fax tone, enter the start code using the telephone. 3. After confirming that the printer has started receiving the fax, hang up the handset. Receiving Faxes by Polling (Polling Receive) You can receive a fax stored on another fax machine by dialing the fax number. Use this feature to receive a document from a fax information service. However, if the fax information service has an audio guidance feature that you need to follow to receive a document, you cannot use this feature. Note:
To receive a document from a fax information service that uses audio guidance, just dial the fax number using the connected telephone, and operate the phone and the printer following the audio guidance. 1. Enter Fax from the home screen. 2. Press the OK button, and then enable Polling Receive . 3. Enter the fax number. 4. Press the x button. 77