User's Guide Faxing 5. Press the x (B&W) button. To delete the stored document, delete it from Job Monitor in Status Menu . Related Information & “Sending Faxes Using the Control Panel” on page 97 & “Placing Originals” on page 49 & “Fax Mode” on page 26 & “Checking Fax Jobs” on page 111 Sending Many Pages of a Monochrome Document (Direct Send) When sending a fax in monochrome, the scanned document is temporarily stored in the printer's memory. Therefore, sending a lot of pages may cause the printer to run out of memory and stop sending the fax.
You can avoid this by enabling the Direct Send feature, however, it takes longer to send the fax because the printer performs scanning and sending simultaneously. You can use this feature when there is only one recipient. From the home screen, select Fax > Menu > Fax Send Settings > Direct Send > On . Sending a Fax Preferentially (Priority Send) You can send an urgent document ahead of the other faxes waiting to be sent. From the home screen, select Fax > Menu > Fax Send Settings > Priority Send > On . Note: You cannot send your document preferentially while one of the following is in progress because the printer cannot accept another fax.
❏ Sending a monochrome fax with Direct Send enabled ❏ Sending a color fax ❏ Sending a fax using a connected telephone ❏ Sending a fax sent from the computer Sending Different Size Documents Using ADF (Continuous Scan from ADF) If you place different sized originals in the ADF, all of the originals are sent at the largest size among them. You can send them in their original sizes by sorting and placing them by size, or placing them one by one. Before placing originals, select Fax > Menu > Fax Send Settings > Continuous Scan from ADF > On from the home screen. Follow the on-screen instructions to place originals. The printer stores the scanned documents, and sends as one document. Note:
If you leave the printer untouched for 20 seconds after prompted to set the next originals, the printer stops storing and starts sending the document. 101