EPSON — Scanning Is Too Slow

User's Guide Solving Problems ❏ When you place multiple originals on the scanner glass to scan them separately, but they are scanned onto a single file, place the originals at least 20 mm (0.8 inch) apart. If the problem continues, place one original at a time. ❏ When scanning from the control panel, set the scan area correctly. ❏ When scanning using the thumbnail preview in EPSON Scan, move the original 4.5 mm (0.18 inch) away from the edges of the scanner glass. In other situations, move the original 1.5 mm (0.06 inch) away from the edges of the scanner glass. ❏ When using the thumbnail preview for a large original in Professional Mode , the scanning area may not be correct.

When previewing in EPSON Scan, create marquees of the area you want to scan on the Normal tab in the Preview window. ❏ Click Configuration in EPSON Scan, and then clear Auto Photo Orientation on the Preview tab. ❏ If Auto Photo Orientation in EPSON Scan does not work as intended, see the EPSON Scan help. ❏ When scanning with EPSON Scan the available scanning area may be restricted if the resolution setting is too high. Lower the resolution or adjust the scanning area in the Preview window.

Related Information & “Placing Originals” on page 49 & “Cleaning the Scanner Glass” on page 139 & “Scan Mode” on page 24 The Scanned Image Problem Could Not be Cleared If you have tried all of the solutions and have not solved the problem, click Configuration in the EPSON Scan window, and then click Reset All on the Other tab to initialize the EPSON Scan settings. If initialization does not solve the problem uninstall and re-install EPSON Scan. Related Information & “Uninstalling Applications” on page 147 & “Installing Applications” on page 149 Other Scanning Problems Thumbnail Preview Does Not Work Properly See the EPSON Scan help. Scanning Is Too Slow Lower the resolution.

Related Information & “Scan Mode” on page 24 176