EPSON — Cannot Save Data to a Memory Device

User's Guide Solving Problems Other Problems Slight Electric Shock when Touching the Printer If many peripherals are connected to the computer, you may feel a slight electric shock when touching the printer. Install a ground wire to the computer that is connected to the printer. Operation Sounds Are Loud If operations sounds are too loud, enable quiet mode. However, this may slow down printer operations. ❏ Windows printer driver Select On as the Quiet Mode setting on the Main tab. ❏ Mac OS X printer driver Select System Preferences from the menu > Printers & Scanners (or Print & Scan , Print & Fax ), and then select the printer. Click Options & Supplies > Options (or Driver ).

Select On as the Quiet Mode setting. The Date and Time Are Incorrect Set the date and the time correctly on the control panel. After a power failure caused by a lightning strike or if the power is left off for a long time, the clock may show the wrong time. Related Information & “System Administration” on page 30 Memory Device Is not Recognized Enable the memory device in the Memory Device Interface settings on the control panel. Related Information & “System Administration” on page 30 Cannot Save Data to a Memory Device ❏ Insert the memory device in the printer, and then select Fax Output > Other Settings > Create Folder to Save to create a folder to save documents in the memory device.

You cannot use a memory device that does not have a folder. ❏ Check that the memory device is not write protected. ❏ Check that the memory device has enough available memory. If the available memory is low, data cannot be saved. 183