User's Guide Scanning Related Information & “System Administration” on page 30 & “Configuring Mail Server” on page 205 & “Managing Contacts” on page 54 & “Placing Originals” on page 49 & “Scan Mode” on page 24 & “Presets Mode” on page 37 & “Scanning Using Document Capture Pro (for Windows Only)” on page 83 Scanning to a Network Folder or FTP Server You can save the scanned image to a specified folder on a network. You can specify the folder by entering a folder path directly, but it may be easier if you register the folder information in the contacts list first. Note: Before you use this feature, make sure the printer's Date/Time and Time Difference settings are correct.
Access the menus from System Administration > Common Settings . 1. Place the originals. 2. Enter Scan from the home screen. 3. Select Network Folder/FTP . 4. Specify the folder. ❏ To select from the contacts list: Press Contacts , select a contact, and then press Proceed . ❏ To enter the folder path directly: Press Enter Location . Select Communication Mode , enter the folder path as Location , and then make other folder settings. Note: Enter the folder path in the following format. When using SMB as the communication mode: \\host name\folder name When using FTP as the communication mode: ftp://host name/folder name 5. Press Format , and then select the file format. 6.
Press Menu , and then make settings for File Settings and Basic Settings . Note: ❏ When you select PDF as the file format, you can set a password to protect the file. Select PDF Settings , and then make settings. ❏ Press Preset to save your settings as a preset. 7. Press the x button. The scanned image is saved. 81