EPSON — Scanning to a Computer (WSD)

User's Guide Scanning Scanning Using Document Capture Pro (for Windows Only) You can scan the original using the settings specified in Document Capture Pro. Note: ❏ Before scanning, install Document Capture Pro and make settings for the job. ❏ Before scanning, connect the printer and the computer to the network. 1. Place the originals. 2. Enter Scan from the home screen. 3. Select Document Capture Pro . 4. Press Select Computer , and then select the computer registered to the job in Document Capture Pro. Note: ❏ If you select Option > Network Scanning Settings , and enable Protect with password in Document Capture Pro, enter a password. ❏ If you set only one job, proceed to step 6. 5.

Select the job. 6. Press the area in which the job content is displayed, and check the job details. 7. Press the x button. The scanned image is saved. Related Information & “Placing Originals” on page 49 & “Document Capture Pro (for Windows Only)” on page 145 Scanning to a Computer (WSD) Note: ❏ Before using this feature, you need to setup your computer. See the Network Guide for more details. ❏ This function is only available for computers running Windows 8.1/Windows 8/Windows 7/Windows Vista. 1. Place the originals. 2. Enter Scan from the home screen. 3. Select Computer (WSD) . 4. Select a computer. 5. Press the x button. The scanned image is saved. Note:

See your computer's documentation for information on where the scanned image is stored on the computer. 83