User's Guide Faxing Making Settings for a PBX Phone System Make the following settings when using the printer in offices that use extensions and require external access codes, such as 0 and 9, to get an outside line. 1. Enter Setup from the home screen. 2. Select System Administration > Fax Settings > Basic Settings > Line Type . 3. Select PBX . 4. On the Access Code screen, select Use . 5. Press the Access Code field, enter the external access code used for your phone system, and then press the enter key at the bottom-right of the screen. The access code is stored in the printer. When sending a fax to an outside fax number, enter # (hash) instead of the actual access code. Note:
When # (hash) is entered at the beginning of the fax number, the printer replaces the # with the stored access code when dialing. Using # helps avoid connection problems when connecting to an outside line. Making Paper Source Settings to Receive Faxes Set the paper sources that you do not want to use for printing received documents or fax reports. Make this setting if you have loaded special paper such as photo paper in one paper source and you do not want to use the paper for printing faxes. 1. Enter Setup from the home screen. 2. Select System Administration > Printer Settings > Paper Source Settings > Auto Select Settings > Fax . 3.
Select the paper source that you do not want to use for printing faxes, and then disable it. Sending Faxes Basic Fax Sending Operations Send faxes in color or monochrome (B&W). When sending a fax in monochrome, you can preview the scanned image on the LCD screen before sending. Note: ❏ If the fax number is busy or there is some problem, the printer automatically redials after one minute. ❏ You can reserve up to 50 monochrome fax jobs even while the phone line is in use for a voice call, sending another fax, or receiving a fax. You can check or cancel reserved fax jobs from Job Monitor in Status Menu .
❏ If you have enabled the Save Failure Data feature, failed faxes are saved, and you can resend them from Job Monitor in Status Menu . 96