Fasten seat belts Never use bleach, dyes or chemical solvents to clean seat belts. These materials can seriously impair the fabric properties of the seat belt. 1 Adjust the seat to a suitable position. 2 Slowly pull out the seat belt and insert the tongue into the buckle until you hear a "click". Retractor with preload Make sure the shoulder belt spans the entire length of the shoulder diagonally, across the chest. 3 Make the lap belt as low as possible across the crotch. In certain types of vehicle crashes (depending on the angle and severity of the crash), the retractor tightens the seat belts to help restrain the occupants of the vehicle. warn!
After a crash, the retractor becomes hot and may burn your skin. Prolonged exposure to fumes and dust from detonating retractors may cause skin or eye irritation. If eyes and skin abrasions become infected by dust (smoke), rinse eyes and skin abrasions immediately; if you still feel unwell after washing, seek medical attention immediately. illustrate! warn! Do not recline the seat back too far. □After the detonation of the retractor assembly with pre- tightening function, a small amount of dust (smoke) will be released, and there may be a loud noise at the same time . This is normal and will not cause a fire. Before fastening the seat belt, check whether there are foreign objects (such as:
food residues) in the socket of the buckle etc.), if there are foreign objects, please take them out in time. To ensure that the seat belt works properly, be sure to insert the seat belt into the matching buckle use seat belt