start and drive 口动和马驶 ABS Vehicle Stability Control is an assistance system and cannot handle all situations or road conditions. It is always the driver's responsibility to operate the vehicle safely and prudently, and to obey the laws and traffic laws and regulations in force. Never disassemble, remove or modify the vehicle suspension yourself. Otherwise, the vehicle stability control system may not operate properly and the vehicle's handling may be adversely affected. The vehicle is equipped with an anti-lock braking system that prevents the wheels from locking up when you apply maximum braking force.
Improves steering control of the vehicle in emergency braking situations in most road conditions. Notice! On rough, gravel, or water/snow-covered roads, braking distances will be longer than on normal roads. When Vehicle Stability Control is switched off, less stability control is applied to the vehicle. illustrate! □During braking, you may feel a continuous "clack" sound from the engine room and vibrations from the brake pedal at the same time. This is a normal phenomenon caused by the operation of the anti-lock brake system, and it is not a malfunction. □When the brake anti-lock braking system stops working, the feel of the brake pedal will return to the state of non- anti-lock braking.
You can turn on/off the vehicle stability control system through the central display screen, see the electronic version of the user manual for details. illustrate! If the vehicle gets bogged down in snow, sand, or other conditions, turning off stability control can help the vehicle get out of trouble. Description of functional status Anti-lock braking system malfunction warning light : If this warning light comes on after the vehicle is started or while the vehicle is being driven, it indicates that there may be a malfunction in the anti- lock braking system. 29