In case of emergency microwave window installation of the automotive electronic signs and the effective reading of data. 50 tire pressure label The microwave window of the vehicle is located in the horizontal center of the windshield glass and vertically upper. The automotive electronic identification should be installed in the middle right of the microwave window. It cannot be blocked by the interior rearview mirror mounting bracket, sensor bracket, etc. Check your tire pressure often, especially before starting a long Notice! drive. You can find the recommended tire pressure specifications Do not cover, squeeze or dismantle the car electronic identification.
in the technical data section of the tire pressure label (located If the logo is damaged, please go to the logo issuing agency to on the driver's side B-pillar). reapply in time. Under- or over-inflation may adversely affect tire life and illustrate! vehicle handling, resulting in loss of vehicle control. To meet strict vehicle stability and handling requirements, □Please keep the windshield clean and dry; do not paste film or metal please install the wheels/tyres recommended by ZEEKR. Damage materials on the microwave window, to ensure the standardized