Supermicro X10DRT-B+ — Supermicro X10DRT-B+ Motherboard User's Manual PDF (Rev 1.0c)

Chapter 1: Overview Jumper Description Default Setting X10DRT-B+ Motherboard Jumpers JPB1 Baseboard Management Controller (BMC) Enable Pins 1-2 (Enabled) JPME2 Manufacturing Mode Pins 1-2 (Normal) JVRM1/2 I 2 C Bus for VRM Pins 1-2 (BMC:

Normal) X10DRT-B+ Motherboard Connectors 1-5 JBT1 Clear CMOS See Chapter 2 JPG1 VGA Enable Pins 1-2 (Enabled) JWD1 Watch Dog Timer Enable Pins 1-2 (Reset) Connectors Description Battery (JBAT1) Onboard CMOS battery (See more info in Chapter 3) FAN3, FAN4 System fan headers IPMI LAN Dedicated IPMI LAN port _ JF1 Power and front control panel connector JF2 PCI-E 3.0 x4 slot supported by CPU1 JSD1 SATA DOM (Disk-On-Module) power connector JTPM1 TPM (Trusted Platform Module)/Port 80 header SIOM CPU1 PCI-E 3.0 x16 slot for proprietary add-on module use SLOT1 PCI-E 3.0 x16 slot supported by CPU1 SLOT2 PCI-E 3.0 x16 slot supported by CPU2 S-SATA3 SATA DOM with power-pin connector SXB1 PCI-E 3.0 x4 slot (supported by CPU1) and SATA connec­ tions (I-SATA0~5 & S-SATA0~2) SXB2 PCI-E 3.0 x24 slot supported by CPU2 UID SW UID (Unit Identifier) switch USB0/1 (3.0) Back panel USB 3.0 ports VGA Back panel VGA port