Chapter 1: Overview 1-3 Special Features Recovery from AC Power Loss The Basic I/O System (BIOS) provides a setting that determines how the system will respond when AC power is lost and then restored to the system. You can choose for the system to remain powered off (in which case you must press the power switch to turn it back on), or for it to automatically return to the power-on state. See the Advanced BIOS Setup section for this setting. The default setting is Last State . 1-4 System Health Monitoring This section describes the features of system health monitoring of the motherboard.
This motherboard has an onboard Baseboard Management Controller (BMC) chip that supports system health monitoring. Once a voltage becomes unstable, a warn ing is given, or an error message is sent to the screen. The user can adjust the voltage thresholds to define the sensitivity of the voltage monitor. Fan Status Monitor with Firmware Control The system health monitor embedded in the BMC chip can check the RPM status of a cooling fan. The CPU and chassis fans are controlled via lPMI 2.0. Environmental Temperature Control System Health sensors in the BMC monitor temperatures and voltage settings of onboard processors and the system in real time via the IPMI interface.
Whenever the temperature of the CPU or the system exceeds a user-defined threshold, the system cooling fan will be turned on to prevent the system from overheating. Note : To avoid possible system overheating, please be sure to provide adequate airflow to your system. This feature is available when used with SuperDoctor 5, which is used to notify the user of certain system events. For example, you can configure SuperDoctor 5 to provide you with warnings when the system temperature, CPU temperatures, voltages and fan speeds go beyond a predefined range. System Resource Alert 1-11