X10DRT-B+ Motherboard User’s Manual 2-5 Motherboard Installation All motherboards have standard mounting holes to fit different types of chassis. Make sure that the locations of all the mounting holes for both motherboard and chassis match. Although a chassis may have both plastic and metal mounting fas teners, metal ones are highly recommended because they ground the motherboard to the chassis. Make sure that the metal standoffs click in or are screwed in tightly. Then use a screwdriver to secure the motherboard onto the motherboard tray.
Tools Needed Phillips Screwdriver Pan head screws (11 pieces) Standoffs (11 pieces, if needed) Location of Mounting Holes There are eleven (11) mounting holes on this motherboard indicated by the arrows. X10DRT-B+ Rev. 1.01 BIOS LICENSE IPMI CODE Caution: 1) To avoid damaging the motherboard and its components, BAR CODE please do not use a force greater than 8 lb/inch on each mounting screw during motherboard installation. 2) Some components are very close to the mounting holes. Please take precautionary measures to avoid damaging these components when installing the motherboard to the chassis. 2-28