X10DRT-B+ Motherboard User’s Manual Universal Serial Bus (USB) Two USB 3.0 ports are located on the back panel (USB 0/1). (Cables are not included.) See the table on the right for pin definitions. Video Connector A Video (VGA) connector is located on the back panel. This connector is sup ported by the ASpeed BMC and is used to provide video display. Refer to the layout below for the location. 1 2 3 1. USB0 (3.0) 2. USB1 (3.0) 3. VGA BIOS LICENSE IPMI CODE X10DRT-B+ Rev. 1.01 2 3 1 BAR CODE 2-30 USB (3.0) 0/1 Pin Definitions Pin# Definition 1 +5V 2 D- 3 D+ 4 Ground 5 RX- 6 RX+ 7 Ground 8 TX- 9 TX+