X10DRT-B+ Motherboard User’s Manual Execute Disable Bit (Available if supported by the OS & the CPU) Select Enable to enable the Execute-Disable Bit technology which will allow the processor to designate areas in the system memory where an application code can execute and where it cannot, thus preventing a worm or a virus from flooding illegal codes to overwhelm the processor or damage the system during an attack. The options are Enable and Disable. (Refer to Intel and Microsoft Web sites for more information.) PPIN Control Select Unlock/Enable to use the Protected-Processor Inventory Number (PPIN) in the system. The options are Unlock/Enable and Unlock/Disable.
Hardware Prefetcher (Available when supported by the CPU) If set to Enable, the hardware prefetcher will prefetch streams of data and instruc tions from the main memory to the L2 cache to improve CPU performance. The options are Disable and Enable . Adjacent Cache Prefetch (Available when supported by the CPU) If this feature is set to Disable, the CPU prefetches the cache line for 64 bytes. If this feature is set to Enable , the CPU prefetches both cache lines for 128 bytes as comprised. The options are Disable and Enable .
Use this item to set the limit on power performance states for the run-time processor, with P0 being the state with the highest power and frequency, and P1, a step lower in performance than P0, with its voltage and frequency scaled back a notch. The options are Between P1/P0 and Below P1. DCU Streamer Prefetcher (Available when supported by the CPU) Select Enable to enable the DCU (Data Cache Unit) Streamer Prefetcher which will stream and prefetch data, and send it to the Level 1 data cache to improve data processing and system performance. The options are Disable and Enable .
DCU IP Prefetcher (Available when supported by the CPU) Select Enable for DCU (Data Cache Unit) IP Prefetcher support, which will prefetch the next IP address in line to L1 cache to improve network connectivity and system performance. The options are Disable and Enable . Direct Cache Access (DCA) Select Enable to use Intel's DCA (Direct Cache Access) Technology to improve ef ficiency in data transferring. The options are Disable, Enable, and Auto . X2APIC Select Enable to activate APIC (Advanced Programmable Interrupt Controller) sup port to enhance system performance. The options are Enable and Disable . 4-16