Supermicro X10DRT-B+ — Supermicro X10DRT-B+ Motherboard User's Manual PDF (Rev 1.0c)

X10DRT-B+ Motherboard User’s Manual CPU P State Control (Available when Power Technology is set to Custom) EIST (P-States) EIST (Enhanced Intel SpeedStep Technology) allows the system to automatically adjust processor voltage and core frequency to reduce power consumption and heat dissipation. The options are Disable, and Enable. Turbo Mode (Available when Intel® EIST Technology is enabled) Select Enable to use the turbo mode to boost system performance. The options are Enable and Disable. P-State Coordination Use this feature to change the P-State (Power-Performance State) coordination type. P-State is also known as "SpeedStep" for Intel processors.

Select HW_ALL to change the P-State coordination type for all hardware components only. Select SW_ALL to change the P-State coordination type for all software installed in the system. Select SW_ANY to change the P-State coordination type for a particular software program specified by the user in the system. The options are HW_All , SW_ALL, and SW_ANY. CPU HWPM State Control (Available when Power Technology is set to Custom) Enable CPU HWPM (Hardware Power Management) Use this feature to configure CPU hardware power management settings to enhance energy performance. The options are Disable , HWPM Native Mode, HWMP OOB Mode.

Enable CPU Autonomous CState Select Enable for CPU Autonomous C-State support which will allow the CPU to convert a "HALT" instruction to an "MWait" state to conserve power consumption. The options are Disable and Enable. CPU C State Control (Available when Power Technology is set to Custom) Package C State limit Use this feature to set the limit on the C-State package register. The options are C0/C1 State, C2 State, C6 (Non Retention) State , and C6 (Retention) State. 4-18