Supermicro X10DRT-B+ — Supermicro X10DRT-B+ Motherboard User's Manual PDF (Rev 1.0c)

X10DRT-B+ Motherboard User’s Manual QPI PCI-E Configuration Base / Size Link Frequency Select Use this feature to select the desired QPI link frequency. The options are 6.4 GB/s, 8.0 GB/s, 9.6 GB/s, Auto , and Auto Limited. Link L0p Enable Select Enable for the QPI to enter the L0p state for power saving. The options are Disable and Enable . Link L1 Enable Select Enable for the QPI to enter the L1 state for power saving. The options are Disable and Enable . COD Enable (Available when the OS and the CPU support this feature) Select Enable for Cluster-On-Die support to enhance system performance in cloud computing. The options are Enable and Disable .

Early Snoop (Available when the OS and the CPU support this feature) Select Enable for Early Snoop support to enhance system performance. The options are Enable Disable, and Auto . Home Dir Snoop with IVT-Style OSB (Available when the OS and the CPU support this feature) Select Enable to use the Home Directory snoop mode for Opportunistic Snoop Broadcast (OSB) support for Ivy Bridge-basd systems to boost system perfor­ mance. The options are Enable Disable, and Auto . Isoc Mode Select Enable to enable Isochronous support to meet QoS (Quality of Service) requirements. This feature is especially important for Virtualization Technology. The options are Enable and Disable .

Memory Configuration Integrated Memory Controller (IMC) Enforce POR Select Enable to enforce POR restrictions on DDR4 frequency and voltage programming. The options are Enabled and Disabled. 4-22