MNL-1039 - 945 - Motherboard - Super Micro Computer, Inc. (EN)

X7SLM X7SLM+ USER’S MANUAL Revision 1.0b

Стр. 1

The information in this User’s Manual has been carefully reviewed and is believed to be accurate. The vendor assumes no responsibility for any inaccuracies that may be contained in this document, makes no commitment to update or to keep current the information in this manual, or to notify any person or organization of the updates. Please Note: For the most up-to-date version of this manual, please see our web site at www.supermicro.com. Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product described in this manual at any time and without notice.

This product, including software and docu- mentation, is the property of Supermicro and/or its licensors, and is supplied only under a license. Any use or reproduction of this product is not allowed, except as expressly permitted by the terms of said license. IN NO EVENT WILL SUPER MICRO COMPUTER. INC. BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. IN PARTICULAR, SUPER MICRO COMPUTER. INC.

SHALL NOT HAVE LIABILITY FOR ANY HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH HARDWARE, SOFTWARE, OR DATA. Any disputes arising between manufacturer and customer shall be governed by the laws of Santa Clara County in the State of California, USA. The State of California, County of Santa Clara shall be the exclusive venue for the resolution of any such disputes. Supermicro's total liability for all claims will not exceed the price paid for the hardware product. FCC Statement:

This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the manufacturer’s instruction manual, may cause harmful interference with radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case you will be required to correct the interference at your own expense.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/ perchlorate” WARNING: Handling of lead solder materials used in this product may expose you to lead, a chemical known to the State of California to cause birth defects and other reproductive harm. Manual Revision 1.0b Release Date: August 27, 2010 Unless you request and receive written permission from Super Micro Computer, Inc., you may not copy any part of this document.

Information in this document is subject to change without notice. Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders. Copyright © 2010 by Super Micro Computer, Inc. All rights reserved. Printed in the United States of America

Стр. 2

Preface Preface This manual is written for system integrators, PC technicians and knowledgeable PC users. It provides information for the installation and use of the X7SLM/X7SLM+ motherboard. About This Motherboard The X7SLM/X7SLM+ supports a single Intel® Core™ 2 Duo/Pentium dual-core/ Pentium D/Pentium 4/Celeron dual-core/Celeron/Celeron D Processor with a system bus speed of up to 800 MHz. The Intel® Core™ 2 Duo/Pentium/Celeron Processor supports the 775-Land Grid Array Package that interfaces with the motherboard via an LGA775 socket.

With support of the Intel® Core Microarchitecture Technology, Graphics Media Accelerator 950, Advanced Digital Media Boost, and Smart Memory Access, the X7SLM/X7SLM+ delivers unparalleled system performance and great energy efficiency in a slim package. Please refer to the motherboard specifica- tions pages on our web site (http://www.supermicro.com/Products/) for updates on supported processors. This product is intended to be installed and serviced by a professional. Manual Organization Chapter 1 describes the features, specifications and performance of the mainboard and provides detailed information about the chipset. Chapter 2 provides hardware installation instructions.

Read this chapter when in- stalling the processor, memory modules and other hardware components into the system. If you encounter any problems, see Chapter 3 , which describes trouble- shooting procedures for video, memory and system setup stored in the CMOS. Chapter 4 includes an introduction to the BIOS and provides detailed information on running the CMOS Setup utility. Appendix A provides BIOS Error Beep Codes. Appendix B lists the Windows OS Installation Instructions. Appendix C lists Other Software Program Installation Instructions. Conventions Used in the Manual:

Special attention should be given to the following symbols for proper installation and to prevent damage done to the components or injury to yourself: Danger/Caution: Instructions to be strictly followed to prevent catastrophic system failure or to avoid bodily injury iii

Стр. 3

X7SLM/X7SLM+ User’s Manual Warning: Important information given to ensure proper system installation or to prevent damage to the components Note: Additional Information given to differentiate various models or pro- vides information for correct system setup. iv

Стр. 4