Supermicro X8DTG-QF+ — X8DTG-QF+ 1.0.indb

X8DTG-QF+ User's Manual Memory Support The X8DTG-QF+ supports up to 96 GB* of Registered ECC or up to 48 GB of Unbuffered ECC/Non-ECC DDR3 1333/1066/800 MHz Memory in 6 DIMMs. Note 1: For Unbuffered ECC/Non-ECC memory, maximum of 8 GB per DIMM is supported. Note 2: memory speed support is dependent on the type of CPU used on the board. Note 3: For memory support updates, please refer to our memory recom- mendation list posted on our website at www.supermicro.com. DIMM Module Population Confi guration For memory to work properly, follow the tables below for memory installation.

Memory Support for the Motherboard w/5500 Processors Installed 2-8 Memory Population for Optimal Performance -For a motherboard with One CPU (CPU1) installed Branch 0 Branch 1 Branch 2 3 DIMMs P1 DIMM1A P1 DIMM2A P1 DIMM3A Memory Population for Optimal Performance -For a motherboard with One CPU (CPU2) installed Branch 0 Branch 1 Branch 2 3 DIMMs P2 DIMM1A P2 DIMM2A P2 DIMM3A Memory Population for Optimal Performance -For a motherboard with Two CPUs installed CPU1 CPU2 Branch 0 Branch 1 Branch 3 Branch 0 Branch 1 Branch 3 6 DIMMs P1 DIMM1A P1 DIMM2A P1 DIMM3A P2 DIMM1A P2 DIMM2A P2 DIMM3A RDIMM Population for the Motherboard with 5500 Processors Installed DIMMs Populated per Channel DIMM Type (Reg.= Registered) Speeds (in MHz) Ranks per DIMM (any combination; SR=Single Rank, DR=Dual Rank, QR=Quad Rank) 1 Reg.

DDR3 ECC 800,1066,1333 SR or DR 1 Reg. DDR3 ECC 800,1066 (Note 1) QR Note 1: 1333 RDIMMs will run at 1066 MHz (-BIOS automatic downgrading). Note 2: 1333/1066 RDIMMs will run at 800 MHz (-BIOS automatic downgrading).