X8DTG-QF+ User's Manual Note 1 : Due to OS limitations, some operating systems may not show more than 4 GB of memory. Note 2 : Due to memory allocation to system devices, the amount of mem- ory that remains available for operational use will be reduced when 4 GB of RAM is used. The reduction in memory availability is disproportional. 2-10 1.35V UDIMM Population for the Motherboard w/5600 Processors Installed DIMMs Populated per Channel DIMM Type (Unb.= Unbuffered) Speeds (in MHz) Ranks per DIMM (any combination; SR=Single Rank, DR=Dual Rank, QR=Quad Rank) 1 Unb. DDR3 ECC 800,1066,1333 SR or DR Note 1: 1333 MHz for two DIMMs per channel is supported when Unbuf./ECC DIMMs are used. Note 2:
MIxing of 1.35V and 1.5V DIMMs is not recommended. Possible System Memory Allocation & Availability System Device Size Physical Memory Available (4 GB Total System Memory) Firmware Hub fl ash memory (System BIOS) 1 MB 3.99 GB Local APIC 4 KB 3.99 GB Area Reserved for the chipset 2 MB 3.99 GB I/O APIC (4 Kbytes) 4 KB 3.99 GB PCI Enumeration Area 1 256 MB 3.76 GB PCI Express (256 MB) 256 MB 3.51 GB PCI Enumeration Area 2 (if needed) -Aligned on 256-M boundary- 512 MB 3.01 GB VGA Memory 16 MB 2.85 GB TSEG 1 MB 2.84 GB Memory available for the OS & other applications 2.84 GB