Chapter 2: Installation Video Connector A Video (JVGA1) connector is located next to the UID switch on the IO backplane. This connector provides video and CRT display. Refer to the board layout below for the location. Unit Identifi er Switch A Unit Identifi er (UID) switch and two LED In- dicators are located on the motherboard. The Rear UID LED (LE4) is located next to the UID switch on the backplane. The Front Panel UID LED is located at Pins 7/8 of the Front Control Panel at JF1. Connect a cable to Pins 7/8 on JF1 for Front Panel UID LED indication. When you press the UID switch, both Rear UID LED and Front Panel UID LED Indicators will be turned on.
Press the UID switch again to turn off both LED Indicators. These UID Indicators provide easy identifi cation of a system unit that may be in need of service. Note: UID can also be triggered via IPMI on the motherboard. Please refer to the IPMI User's Guide posted on our website @http://www.supermi- cro.com. 1. VGA 2. UID Switch X8DTG-QF+ Rev. 1.10 1 2 2-13 UID LED (LE4) Status Color/State OS Status Blue: On Windows OS Unit Identifi ed Blue: Blinking Linux OS Unit Identifi ed UID Switch Pin# Defi nition 1 Button In 2 Ground 3 Ground 4 Ground