Supermicro X8DTG-QF+ — X8DTG-QF+ 1.0.indb

Chapter 4: AMI BIOS Wait For 'F1' If Error When set to Enabled, this feature forces the system to wait until the 'F1' key is pressed if an error occurs. The options are Disabled and Enabled . Hit 'Del' Message Display Select Enable to display "Press DEL to run Setup" during POST. The options are Enabled and Disabled. Interrupt 19 Capture Interrupt 19 is the software interrupt that handles the boot disk function. When this item is set to Enabled, the ROM BIOS of the host adaptors will "capture" Interrupt 19 at bootup and allow the drives that are attached to the host adaptors to function as bootable disks.

If this item is set to Disabled, the ROM BIOS of the host adaptors will not capture Interrupt 19, and the drives attached to the adaptors will not function as bootable devices. The options are Enabled and Disabled. Power Confi guration Watch Dog Function If enabled, the Watch Dog Timer will allow the system to reboot when it is inactive for more than 5 minutes. The options are Enabled and Disabled. Power Button Function If this feature is set to Instant_Off, the system will power off immediately as soon as the user press the power button. If this feature is set to 4_Second_Override, the system will power off when the user presses the power button for 4 seconds or longer.

The options are Instant_Off and 4_Second_Override. Restore on AC Power Loss Use this feature to set the power state after a power outage. Select Power-Off for the system power to remain off after a power loss. Select Power-On for the system power to be turned on after a power loss. Select Last State to allow the system to resume its last state before a power loss. The options are Power-On, Power-Off and Last State . Processor and Clock Options This submenu allows the user to confi gure the Processor and Clock settings. CPU Ratio Select Manual to manually confi gure the CPU Ratio. Select Auto to allow the BIOS to automatically confi gure the CPU Ratio. The options are Auto and Manual. 4-5