Chapter 4: AMI BIOS Memory Frequency This feature forces a DDR3 frequency slower than what the system has detected to run at the frequency as specifi ed. The options are Auto , Force DDR-800, Force DDR-1066, Force DDR-1333 and Force SPD. Memory Mode When Independent is selected, all DIMMs are available to the operating system. When Channel Mirroring is selected, the motherboard maintains two identical copies of all data in memory for redundancy. When Lockstep is selected, the motherboard uses two areas of memory to run the same set of operations in parallel. The options are Independent , Channel Mirroring, and Lockstep.
Demand Scrubbing This is a memory error-correction scheme which the processor to write corrected data back into the memory block from where it was read by the Processor. The options are Enabled and Disabled . Patrol Scrubbing This is a memory error-correction scheme that works in the background looking for and correcting resident errors. The options are Enabled and Disabled. Throttling - Closed Loop Throttling improves reliability and reduces power use in the processor by au- tomatic voltage control during processor idle states. The options are Disabled and Enabled . North Bridge Confi guration This feature allows the user to confi gure the settings for the Intel North Bridge.
Intel I/O AT This feature works with Intel I/O AT (Acceleration Technology) to accelerate the performance of TOE devices. TOE devices are specialized, dedicated processors that are installed on add-on cards or network cards to handle packet processing of the add-on cards. When this feature is set to Enabled, it will enhance overall system performance by providing direct memory access for data transferring. The options are Enabled and Disabled. DCA (Direct Cache Access) Technology (Available when Intel I/O AT is enabled) This feature works in conjunction with Intel I/O AT (Acceleration Technology) to ac- celerate the performance of the TOE device. When this feature set to Enabled, it 4-9