Appendix A: BIOS POST Error Codes Appendix A BIOS Error Beep Codes During the POST (Power-On Self-Test) routines, which are performed each time the system is powered on, errors may occur. Non-fatal errors are those which, in most cases, allow the system to continue the boot-up process. The error messages normally appear on the screen. Fatal errors will not allow the system to continue the boot-up procedure. If a fatal error occurs, you should consult with your system manufacturer for possible repairs. A-1 BIOS Error Beep Codes A-1 BIOS Error Beep Codes Beep Code Error Message Description 1 beep Refresh Circuits have been reset.
(Ready to power up) 5 short beeps + 1 long beep Memory error No memory detected in the system 1 long beep + 8 short beeps Display memory read/write error or no video No video display, video adapter missing or with faulty memory Continuous high (pitch) + low (pitch) System Overheat System overheat