XF95 Manual

Technical Information VEHICLE SERIES F75/85/95, 75/85CF, 95XF, CF75/85, XF95/95 Engine Field Validation COMPONENTS - SYSTEMS - No 9-032 Page 1/1 BOLT-NUT CONNECTION OF THE TORQUE RODS Between the cast iron surface and the bolt or nut of the torque rod connection of the rear axles a washer is fitted. To avoid mistakes when fitted as per production week 2007-25 washers are used on both sides. One under the bolt head and one under the nut. See enclosed drawings. When repairing vehicles with production weeks before 2007-25 a second ring must be added. Make sure that after fitting the bolts, the bolt heads face the front of the vehicle. C900761 C900762 Note:

Report this information and refer to this TI in the following workshop manual: - Workshop manual group 9, 65/75/85 - Workshop manual group 9, 65/75/85CF - Workshop manual group 9, CF65/75/85 - Workshop manual group 9, 95 - Workshop manual group 9, 95XF - Workshop manual group 9, XF95 - Workshop manual group 9, XF95 Engine Field Validation Please bring the contents of this TI to the attention of all those concerned. © 200725

Page 1