How to Use Charging · It is recommended to fully charge the fan before use. · Not connecting to the power outlet · Connect the charging base to the charging port on the botom of the fan base, and then plug in the charging base. · When the batery level indicator is blinking, the fan is successfully connected to the power. · You can use this fan by either connecting to a power outlet or not. The fan is equipped with a built-in Wi-Fi module, and energy consumption occurs even when it is turned off. By fully charging the fan and then turning it off, the batery can last for approximately 2 days. To maintain optimal batery performance, it is recommended to keep charging the fan if it is not in use.
Turning On/Off Turning On Press the buton to start the fan. When turned on for the first time, the default speed is slow (1) and the mode is direct breeze. Press the buton to stop the fan while it is running. Turning Off Switching Speed/Mode Switching Speed Press the buton to adjust the speed, and the corresponding indicators will light up (see table below). Afer the fan is turned off and turned back on again, the speed will be the last used one. Note: Always charge and use the fan in a flat, stable place. · Connecting to the power outlet Note: means the indicator is on; means the indicator is off.
9 Fan Status Batery Level Batery Level Indicator Status On 30%–100％ White 1%–30% Orange 0% Off (The fan will automatically turn off) Off 0%–100％ Off Speed Slow (1) Medium (2) Fast (3) Turbo (4) Indicator Fan Status Batery Level Batery Level Indicator Status On/Off ≤30％ Blinking orange 30%–100% Blinking white 100％ Off