How to Install Connect to An Electrical Outlet Remove Protective Coverings Before using the robot vacuum, remove the protective strips from both sides. Place the charging dock near an electrical outlet in an area with a good Wi-Fi signal. Then connect the charging dock to power. ＞0.5 m ＞0.5 m ＞1.5 m Install the Side Brush Note: Do not place any items within the range of 0.5 m at either side or within 1.5 m in front of the charging dock. Install the side brush onto the clip on the bottom of the robot vacuum. Place the Robot Vacuum Place the robot vacuum onto the charging dock, and the robot vacuum will automatically turn on and start charging.
After 10 minutes of being fully charged, the indicator will go out. Fully charge the robot vacuum when using it for the first time. Side Brush Clip Note: Make sure the charging contacts on the robot vacuum and the dock are fully aligned. 7