Connect with Mi Home/Xiaomi Home App This product works with Mi Home/Xiaomi Home app*. Control your device with Mi Home/Xiaomi Home app. Scan the QR code to download and install the app. You will be directed to the connection setup page if the app is installed already. Or search "Mi Home/Xiaomi Home" in the app store to download and install it. Open Mi Home/Xiaomi Home app, tap "+" on the upper right, and then follow prompts to add your device. * The app is referred to as Xiaomi Home app in Europe (except for Russia). The name of the app displayed on your device should be taken as the default. Note:
The version of the app might have been updated, please follow the instructions based on the current app version. Reseting Wi-Fi Connection When switching to a new router or changing your Wi-Fi password, you will need to reset the vacuum-mop's Wi-Fi connection. To do so, turn on the vacuum-mop, then simultaneously press and hold the butons "+" and " " " " for 3 seconds until you hear a voice saying "Reseting the Wi-Fi connection and entering network configuration mode". Once the Wi-Fi connection is reset, follow the in-app prompts to add the device. Note: Only 2.4 GHz Wi-Fi networks are supported. Restoring Factory Setings Press and hold the Dock buton " " for 5 seconds.
Upon hearing a voice message, press and hold the Dock buton again for 5 more seconds. Separate voice prompts will indicate when the reset begins and afer it is completed. Restoring factory setings will clear all user data. 08