Install an appropriate massage head for the desired type of massage. When installing the massage head, push the massage head base into the muzzle of the massage gun with force, ensuring that the line on the head is flush with the muzzle. The red line in the figure is the schematic line for installation, while it is a glossy surface on the actual product. When disassembling the massage head, hold the massage head and rotate it counterclockwise while pulling upward from the muzzle. Please install and disassemble the massage head when the massage gun is turned off, and ensure that the massage head is installed firmly before turning on the massage gun.
Do not adjust, install or remove the massage head during use to avoid being pinched.