92fb4ed3: Бренд с моделями и категориями (EN)

35438 BHR5311GL 6934177752902 Redmi Buds 3 Pro东南亚俄罗斯版冰晶灰 TWSEJ01ZM 35437 BHR5310GL 6934177752919 Redmi Buds 3 Pro东南亚俄罗斯版曜石黑 TWSEJ01ZM 江苏紫米电子技术有限公司 Redmi Buds 3 Pro东南亚俄罗斯版 说明书 Read this manual carefully before use, and retain it for future reference. Product Overview This logo is for location indication only. 2. When the charging case's indicator light is blinking white, it indicates its batery level is low and it should be charged immediately. Checking the batery level with a Mi phone Afer successfully connecting to a phone, place the earbuds into the charging case and close its lid.

Ensure the Mi phone is unlocked and its Bluetooth is enabled, and hold it close to the charging case, then open the case's lid. A popup to check the batery levels of the earbuds and the charging case will appear on the phone. Note: To use the feature to quickly check the batery level, the phone's system needs to be updated to the latest stable version. Currently, only some Mi phones support this feature. Using quick pairing to connect to a Mi phone Place the earbuds into the charging case and close its lid.

Ensure the Mi phone is unlocked and its Bluetooth is enabled, and hold it close to the charging case, then open the case's lid and follow the instructions on the phone to connect to the earbuds. Note: To use the feature to quickly connect, the phone's system needs to be updated to the latest stable version. Currently, only some Mi phones support this feature. Restoring factory setings 1. Place the earbuds into the charging case. 2. Press and hold the function buton for at least ten seconds until the indicator turns white, then release the buton. 3.

The factory setings of the earbuds have been restored, the connection history has been cleared, the charging case's indicator blinks white, and the earbuds are in pairing mode again. Note: Due to the technical characteristics of Bluetooth, there may be occasional intermitent loss of connection or sound in areas with dense electromagnetic signal interference at 2.4 GHz. Specifications cause fire or even completely damage the product. Do not expose the product to environments with a temperature that is too low or too high (below 0°C or above 45°C). Keep the product's indicator away from the eyes of children and animals while the product is in use. Do not use this product during thunderstorms.

Thunderstorms may cause the product to malfunction and increase the risk of electric shocks. Do not clean this product with alcohol or other volatile liquids. Avoid any contact with liquids. Do not disassemble, puncture or crush the product nor expose it to fire. Stop using the product immediately if there is any swelling. To prevent possible hearing loss, do not use high volume for long periods of time. Do not use the earbuds while driving, and comply with the relevant regulations in your region or country. These earbuds and their accessories may contain small parts. Please keep them out of the reach of children.

Disposal of a batery into fire or a hot oven, or mechanically crushing or cuting of a batery, that can result in an explosion. Leaving a batery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas. A batery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas. Product information and certification marks are located in the Charging Case. Do not put the batery in trash that is disposed of in landfills. When disposing of the batery, comply with local laws or regulations.

Replacement of a batery with an incorrect type that can defeat a safeguard (such as catching fire, explosion, leakage of corrosive electrolyte etc). The symbol indicates DC voltage Do not atempt to disassemble, repair or modify the product, as this may WEEE Information All products bearing this symbol are waste electrical and electronic equipment (WEEE as in directive 2012/19/EU) which should not be mixed with unsorted household waste. Instead, you should protect human health and the environment by handing over your waste equipment to a designated collection point for the recycling of waste electrical and electronic equipment, appointed by the government or local authorities.

Correct disposal and recycling will help prevent potential negative consequences to the environment and human health. Please contact the installer or local authorities for more information about the location as well as terms and conditions of such collection points. Indicator Secondary Function Buton Microphone Charging Port Primary Microphone Type-C Wireless Charging Type-C Wired Charging Connecting to two devices The earbuds can be connected to two different Bluetooth devices simultaneously. Afer connecting the earbuds to the first device, put them in the charging case and open the lid.

Press and hold the function buton on the charging case for two seconds, then the indicator will start blinking white, and the earbuds are ready to be paired with a second device. Charging Case Earbud The center of the wireless charger must be aligned with the center of the charging case in order to charge, which is about 8 mm above the Redmi logo on the back of the charging case. The charging case's indicator will be lit while charging. Note: Illustrations of the product, accessories, and user interface in the user manual are for reference purposes only. The actual product and functions may vary due to product enhancements.

Turning on the earbuds Opening the charging case will automatically turn on the earbuds. Functions Charging Charging the earbuds When the earbuds are placed in the charging case, they will automatically start charging. Charging the charging case Use the included type-C charging cable to charge the charging case, or place it on a compatible wireless charger with the indicator facing upwards. The indicator is white while charging, and turns off when charging is completed. Note: Please use a power adapter that meets the local certification requirements, or a wireless charger that supports charging at 5 W or higher.

How to Use Sleep mode Place the earbuds back into the charging case and close the lid, then the earbuds will disconnect and enter sleep mode automatically. Disconnecting When a device's Bluetooth is disabled, or if the earbuds are out of range, the earbuds will automatically enter awaiting connection mode. If the earbuds remain disconnected from the device for 10 minutes, they will enter sleep mode. Wearing the earbuds again will wake them up and they will enter awaiting connection mode. During calls Gently tap either earbud twice: Answer call Gently tap either earbud three times: Reject/End call Music The Redmi Buds 3 Pro have an anti-counterfeit label on the outer packaging.

You can check the authenticity of the product by scratching the anti-counterfeit coating and entering the anti-counterfeit code. Website: www.mi.com/verify Anti-counterfeit Label Instructions Wearing the earbuds Take the earbuds out of the charging case, and insert them into your ears according to the lef (L) and right (R) marks. Note: Afer using the earbuds, place them back into the charging case. This will extend their service life and helps to avoid losing or misplacing them. Gently tap either earbud twice:

Стр. 1