Connecting with Mi Home/Xiaomi Home App Notes: This product works with Mi Home/Xiaomi Home app*. Control your device with Mi Home/Xiaomi Home app. • The version of the app might have been updated, please follow the instructions based on the current app version. • If you fail to scan the heater's QR code, search for its name to add it. Scan the QR code to download and install the app. You will be directed to the connection setup page if the app is installed already. Or search "Mi Home/Xiaomi Home" in the app store to download and install it. Open Mi Home/Xiaomi Home app, tap "+" on the upper right, and then follow prompts to add your device.
* The app is referred to as Xiaomi Home app in Europe (except for Russia). The name of the app displayed on your device should be taken as the default. 99EE4FEC Wi-Fi Indicator Status Description Care & Maintenance • Before cleaning the heater, turn it off and unplug it and wait for it to cool down completely. • Use a clean, soft, and damp cloth to wipe the heater. Do not drip water into the heater during cleaning. • Do not disassemble the heater during care and maintenance. • After cleaning, ensure the heater is completely dry before using or storing it. • Avoid bumping or scratching the heater to prevent its surface coating from being damaged and rusting.
• When planning not to use the heater for a long time, store the heater in its original packaging in a dry place. 6 Heater Status Wi-Fi Indicator Status Awaiting connection Blinking slowly (on for 0.2 seconds, then off for 0.8 seconds, repeatedly) Network connected successfully On Reconnecting automatically after a disconnection Blinking quickly (on for 0.1 seconds, then off for 0.2 seconds, repeatedly) Updating the firmware Blinking (on for 0.05 seconds then off for 0.1 seconds, and on for 0.05 seconds then off for 0.8 seconds, repeatedly) Network connection function disabled Off