User's Guide Maintaining the Printer 1. Open the document cover. 2. Use a soft, dry, clean cloth to clean the surface of the scanner glass. Note: ❏ If the glass surface is stained with grease or some other hard-to-remove material, use a small amount of glass cleaner and a soft cloth to remove it. Wipe off all remaining liquid. ❏ Do not press the glass surface too hard. ❏ Be careful not to scratch or damage the surface of the glass. A damaged glass surface can decrease the scan quality. Saving Power The printer enters sleep mode or turns off automatically if no operations are performed for a set period. You can adjust the time before power management is applied.
Any increase will affect the product's energy efficiency. Please consider the environment before making any change. Depending on the location of purchase, the printer may have a feature that turns it off automatically if it is not connected to the network for 30 minutes. Saving Power - Control Panel 1. Enter Settings from the home screen using the l or r button, and then press the OK button. 2. Select Printer Setup using the l or r button, and then press the OK button. 3. Do one of the following. ❏ Select Sleep Timer or Power Off Settings > Power Off If Inactive or Power Off If Disconnected using the l or r button, and then press the OK button.
❏ Select Sleep Timer or Power Off Timer using the l or r button, and then press the OK button. Note: Your product may have the Power Off Settings or Power Off Timer feature depending on the location of purchase. 4. Select the setting using the u or d button, and then press the OK button. 113