User's Guide Solving Problems Blurry Prints, Vertical Banding, or Misalignment Align the print head using the Vertical Alignment feature. Related Information & “Aligning the Print Head - Control Panel” on page 110 Print Quality Does Not Improve Even After Aligning the Print Head During bidirectional (or high speed) printing, the print head prints while moving in both directions, and vertical lines may be misaligned. If print quality does not improve, disable the bidirectional (or high speed) setting. Disabling this setting may slow down printing speed. ❏ Control panel Disable Bidirectional in the print settings. ❏ Windows Clear High Speed on the printer driver’s More Options tab.
❏ Mac OS X Select System Preferences from the menu > Printers & Scanners (or Print & Scan , Print & Fax ), and then select the printer. Click Options & Supplies > Options (or Driver ). Select Off as the High Speed Printing setting. Related Information & “Menu Options for Print Photos Mode” on page 54 Print Quality is Poor Check the following if the print quality is poor due to blurry prints, banding, missing colors, faded colors, and misalignment in the prints. ❏ Use paper supported by this printer. ❏ Select the appropriate paper type setting for the type of paper loaded in the printer. ❏ Do not print on paper that is damp, damaged, or too old.
❏ If the paper is curled or the envelope is puffed up, flatten it. ❏ Perform a nozzle check, and then clean the print head if any of the print head nozzles are clogged. ❏ Align the print head. 150