EPSON — Cannot Scan the Correct Area on the Scanner Glass

User's Guide Solving Problems ❏ When scanning from the scanner glass, place black paper or a desk pad over the original. Related Information & “Placing Originals on the Scanner Glass” on page 44 & “Scanning Using Epson Scan 2” on page 89 Text is Blurred ❏ In Document Mode in Epson Scan 2, select the Advanced Settings tab, and then Image Option > Text Enhancement . ❏ Select Document Mode as the Mode in Epson Scan 2. Scan using the settings for documents in Document Mode . ❏ In Document Mode in Epson Scan 2, when Image Type on the Main Settings tab is set to Black & White , adjust Threshold on the Advanced Settings tab. When you increase the Threshold , the black color area becomes larger.

❏ If the resolution is low, try increasing the resolution and then scanning. Related Information & “Scanning Documents (Document Mode)” on page 89 Moirй Patterns (Web-Like Shadows) Appear If the original is a printed document, moirй patterns (web-like shadows) may appear in the scanned image. ❏ On the Advanced Settings tab in Epson Scan 2, set Descreening . ❏ Change the resolution, and then scan again. Related Information & “Scanning Using Epson Scan 2” on page 89 Cannot Scan the Correct Area on the Scanner Glass ❏ Make sure the original is placed correctly against the alignment marks.

❏ If the edge of the scanned image is missing, move the original slightly away from the edge of the scanner glass. ❏ When placing multiple originals on the scanner glass, make sure there is a gap of at least 20 mm (0.79 in.) between the originals. 159