User's Guide Copying Copying Copying Basics 1. Load paper in the printer. When loading in the rear paper feed slot, do not load paper until the printer prompts you to do so. c Important: Make the paper settings on the control panel. 2. Place the originals. 3. Enter Copy from the home screen using the l or r button, and then press the OK button. 4. Set the number of copies using the – or + button. 5. Select color copy or monochrome copy using the l or r button. 6. Select Paper and Copy Settings using the d button, and then press the OK button. Check the settings such as the paper size and the paper type and change the settings if necessary.
Select the setting items using the u or d button and change the settings using the l or r button. Note: If you want to copy by reducing or enlarging the size of a document by a specific percentage, select Custom Size as the Reduce/Enlarge setting, and then specify a percentage using the – or + button. You can change the percentage in increments of 5% by pressing and holding down the – or + button. 7. Press the x button. When printing from the rear paper feed slot, press the x button, and then load paper when you are instructed to do so. Note: The color, size, and border of the copied image are slightly different from the original.
Related Information & “Loading Paper in the Paper Cassette” on page 40 & “Loading Paper in the Rear Paper Feed Slot” on page 44 & “Placing Originals on the Scanner Glass” on page 48 & “Menu Options for Copy Mode” on page 91 Menu Options for Copy Mode Note: Available menus vary depending on the layout you selected. 91