*** Configuring username, password, SSH *** Line 1 SUCCESS: username cisco privilege 15 password cisco Line 2 SUCCESS: ip domain name domain Line 3 SUCCESS: line vty 0 15 Line 4 SUCCESS: login local Line 5 SUCCESS: transport input all Line 6 SUCCESS: end *** ZTP Day0 Python Script Execution Complete *** Cisco IOS XE Fuji 16.9.x to Cisco IOS XE Gibraltar 16.11.x The following example shows the sample boot logs before the .py script is run: --- System Configuration Dialog --- Would you like to enter the initial configuration dialog? [yes/no]:
The process for the command is not responding or is otherwise unavailable The process for the command is not responding or is otherwise unavailable The process for the command is not responding or is otherwise unavailable The process for the command is not responding or is otherwise unavailable The process for the command is not responding or is otherwise unavailable The process for the command is not responding or is otherwise unavailable guestshell installed successfully Current state is: DEPLOYED guestshell activated successfully Current state is: ACTIVATED guestshell started successfully Current state is:
RUNNING Guestshell enabled successfully The following example shows how to configure the device for Day Zero provisioning: Both links down, not waiting for other switches Switch number is 1 Restricted Rights Legend Use, duplication, or disclosure by the Government is subject to restrictions as set forth in subparagraph (c) of the Commercial Computer Software - Restricted Rights clause at FAR sec. 52.227-19 and subparagraph (c) (1) (ii) of the Rights in Technical Data and Computer Software clause at DFARS sec. 252.227-7013. Cisco Systems, Inc.
170 West Tasman Drive San Jose, California 95134-1706 Cisco IOS Software [Fuji], Catalyst L3 Switch Software (CAT9K_IOSXE), Version 16.9.4, RELEASE SOFTWARE (fc2) Technical Support: http://www.cisco.com/techsupport Zero-Touch Provisioning Boot Log for Cisco Catalyst 9000 Series Switches Zero-Touch Provisioning 22