6.2.4. ADJUSTMENT THE CLEARANCE BETWEEN THE LEAD SCREW AND NUT (See Fig. 6-5) Method 1: (See Fig.6-5) Procedure: Remove plug 1 located on the hub of handle 2 . Loose lock nut 3 and nut 4; Set handle 2 on position for half-nut engagement to lead screw; By nut 4 adjust the clearance between lead screw 6 and half-nut 5 so that lead screw motion be ensured; Note : During adjustment procedure the lead screw must be disconnected from the feed box so that the motion may be verified manually. Tighten lock nut 3. Fig.6-5 C:\Users\ELENA\Desktop\UL_C8C_325_ENG.doc 46/67