ZMM-Sliven C8C CU 325 — ZMM-Sliven C8C CU 325 Universal Lathe Machine Manual PDF

1.2 SHIPPING SHEET Note: Marking “ ” on utmost left column indicates the configuration of the machine ordered with standard and optional accessories. Remark “in the box” on the utmost right column describes that the respective item is packed in a packing box. 1.2.1 Main drive motor . . . . . V. . . . . . ………kW . . . . . . Hz, ................. rpm 1 1.2.2 Electric installation completed by electric cabinet and 1 control panel 1.2.3 Main drive motor V-belts:

13х8х1500 L p (A58) 3 In the box 1.2.4 Tool older guard 1 1.2.5 Safety guard for the universal chuck 1 1.2.6 Rear safety guard, movable 1 1.2.7 Rear safety guard, fixed 1 1.2.8 Coolant installation completed by motor-pump 1 1.2.9 Work light 1 1.2.10 Four-position tool holder 1 1.2.11 Insert for the bed gap 1 1.2.12 Changeover gears 1.2.12.1 Metric version: 25,45,50,52,57,58,60,70,75,80,90,96,100,120,127 1 In the box 1.2.12.2 Inch version: 25,40,42,45,58,60,63,70,75,80, 90,94,95,96,100,117,120,127 1 In the box 1.2.13 Set of bolts and shims for machine foundation 1 In the box 1.2.14 Dead centre Morse 3 1 In the box 1.2.15 Reducing sleeve:

Morse 4.5/3 1 In the box 1.2.16 Tool holder key 1 In the box 1.2.17 Camlock key 1 In the box 1.2.18 Key for the tailstock quill 1 In the box 1.2.19 Machine manual (this manual) 1 1.2.20 Machine electric documentation 1 ……………................................................................... ...................................................................................... 1.2.21 Flange for 3-jaw self centring universal chuck 1 160 with studs and nuts 1.2.22 Packing wooden pallet and plastic cover 1 1.2.23 Packing box 1 C:\Users\ELENA\Desktop\UL_C8C_325_ENG.doc 6/67 Model: D.B.C.: mm Series No.: Year : Item Description Qty Remark MACHINE STANDARD ACCESSORIES