en Overview Overview 8 Blender drive cover 9 Drive for blender (optional accessory*) When not in use, attach the blender drive cover. 10 Cord store MUM52../MUM54../MUM58..: Stow the cord in the cord store MUM55../MUM56..: Automatic cord winder Please fold out the illustrated pages. Fig. A : Base unit 1 Release button 2 Swivel arm “Easy Armlift” function to support the upward movement of the arm (see “Work positions”). 3 Rotary switch When the appliance has been switched off (position P ), the appliance runs automatically to the optimum position for changing the tools. MUM52..: P = Stop M = Instantaneous switching at maximum speed, hold switch for required blending duration.
Settings 1-4 , Operating speed: 1 = low speed – slow, 4 = high speed – fast. MUM54../MUM55../MUM56../MUM58..: P = Stop M = Instantaneous switching at maximum speed, hold switch for required blending duration. Settings 1-7 , Operating speed: 1 = low speed – slow, 7 = high speed – fast. 4 On/Off display (MUM54../55../56../58..) Is lit while the appliance is operating (rotary switch on M or 1-7 ). Flashes if the appliance has been operated incorrectly, the electronic fuse has tripped or the appliance is defective – see section “Troubleshooting”. 5 Drive cover To remove the drive cover, press on the rear area and remove cover.
6 Drive for – Continuous-feed shredder and – Citrus press (optional accessory*) When not in use, attach the drive cover. 7 Drive for tools (stirrer, whisk, kneading Bowl with accessories 11 Stainless steel stirring bowl 12 Lid Tools 13 Stirrer 14 Whisk 15 Kneading hook with dough deflector 16 Accessories bag For storage of the tools and cutting discs.
Continuous-feed shredder 17 Pusher 18 Cover with filling shaft 19 Cutting discs a Reversible slicing disc – thick / thin b Reversible shredding disc – coarse / fine c Grating disc – medium-fine 20 Disc holder 21 Housing with outlet opening Blender* 22 Blender jug 23 Lid 24 Funnel * If an accessory is not included in the product package, it can be purchased via the trade or customer service. Operating positions Fig. B : Attention! Before operating the appliance, attach the tool / accessory to the correct drive and in the correct position and place in the operating position according to this table. The swivel arm must be engaged in every operating position.
hook) and mincer (optional accessory*) 20 124_MUM58xxx_8001027214.indb 20 27.11.2015 15:11:45