HOME Figure 2-109. Clamp Fork and Remove Fork Cap 1. See Figure 2-109 . Using FORK TUBE HOLDER (Part No. HD-41177), mount fork assembly in vise. 2. Remove fork cap. 2009 VRSC Service: Chassis 2-87 DISASSEMBLY PART NUMBER TOOL NAME HD-41177 FORK TUBE HOLDER HD-45966 FRONT FORK COMPRESSOR HD-47852 INNER FORK NUT REMOVER/INSTALLER Left Side Wear safety glasses or goggles when servicing fork assembly. Do not remove slider tube caps without relieving spring preload or caps and springs can fly out, which could result in death or serious injury. (00297a) NOTES • When using FRONT FORK COMPRESSOR be sure not to bind the outer fork tube on the tool. • FRONT FORK COMPRESSOR (Part No.
HD-45966) comes with a cup and screw that are for FLT models only and not to be used with this fork assembly. sm03135 sm03136 Figure 2-110. Compress Fork Assembly 3. See Figure 2-110. Compress fork using FRONT FORK COMPRESSOR (Part No. HD-45966).